Driver Installation Procedure: Plug your NESDR into an available USB port Open the 'NESDR Driver Installer', Zadig; Select 'List All Devices' from the 'Options' menu in Zadig; From the main dropdown, select the NESDR. The name of the device can vary depending on your operating system environment. Future Technology Devices International, Ltd FT2232C Dual USB-UART/F IFO IC: USB VID067B&PID2303: Prolific Technology, Inc. PL2303 Serial Port: USB VID067B&PID2304: Profilic USB-to-GPI O/PWM Port: USB VID1A86&PID5523: QinHeng Electronics CH341 in serial mode, usb to serial port converter: USB VID1A86&PID7523: QinHeng Electronics HL-340.

Created on: 27 March 2014

US232R cables from FTDI Chip allow a RS-232 serial port to be added to a PC via the USB port.

RS-232 ports can be very useful for connecting a PC to embedded systems and other electronic devices such as the Raspberry PI.

These USB to serial RS232 Converters need to have drivers installed when using the converters in Windows.

This article shows how to download and install drivers for the converter cables.

Windows 8 and a US232R-100 model converter cable are used as an example in this article, but other cable models and other versions of Windows will operate in a similar way.

Using the cables in Linux will usually not require drivers to be installed. The article on connecting a Raspberry PI board to a Linux computer using a USB to serial port converter cable shows how to connect to the cable's serial port using minicom on a Linux PC.

Downloading and Installing the Drivers

This video shows how to download and install the VCP (Virtual COM Port) drivers in Windows 8:

Virtual COM Port (VCP)

VCP drivers are installed to configure the cable as a Virtual COM Port in Windows.

When configured as a VCP, the USB to serial converter cable will appear as a COM port in Device Manager or other applications that connect to the COM port, e.g. the port will appear as COM3, COM4, etc.

Terminal emulator software can connect to the converter cable by selecting the correct COM port in the software.

Noavaran Elec Port Devices Driver License Test

Articles Menu

-->

For most devices, the Ports device setup class and the Serial function driver provide the functionality required to operate serial ports and COM ports. To install serial ports and COM ports using these system-supplied components, do the following:

• Provide an INF file that specifies the Ports device setup class and the Serial function driver as the service for the port.

• To configure a serial port as COM port, comply with the requirements that are defined in Configuration of COM Ports.

Noavaran Elec Port Devices Driver

For more information about installing serial ports and COM ports using the Ports device setup class and the Serial function driver, see the following topics:

Noavaran Elec Port Devices Driver Vga

If you do a custom installation of a COM port, you must comply with the COM port requirements that are defined in Configuration of COM Ports.